|

Haul Out and Work At Grenada Marine

THIS POST MAY CONTAIN AFFILIATE LINKS. PLEASE READ OUR DISCLOSURE FOR MORE INFO.

Last Updated on November 18, 2019 by Amy

We’ve been really putting the pedal to the metal in Grenada.  Our visit to the main island of Grenada has only been two stops: Grenada Marine and St. George’s, and we know we are missing out on plenty of interesting things to do in Grenada.   Knowing that we have major miles to go in the next three months when we cross the Pacific, we are trying to get the boat in as great of condition as we can.  

Haul Out at Grenada Marine

We enjoyed the facilities at Grenada Marine.  We moored one night, then had the haul out for one night, then launched the next day and spent one more night on the mooring.  The moorings were cheap ($6USD) and the cost for the haul out was reasonable.  There is a restaurant and an Island Water World available, and the staff would help us get anything we needed the next day as long as it was on the island.

Receiving Packages

They received a package for us from Fountaine Pajot, almost like a care package of various hardware around the boat.

Check Mini-keels

One of our biggest reasons for getting hauled out was to check the mini-keel damage we discovered while hauled out in Nanny Cay.  It was very easy to tell once we got hauled out at Grenada Marine that there was no water coming from the keel.  Success!

Bottom Paint Touch Up

I asked around at Grenada Marine and was able to come up with a one-gallon can of Islander 44 bottom paint with about a half an inch of paint left (given to me for free!).  I took a brush and painted over any spots that looked bad – especially the port rudder where we had gotten a pot float stuck off of Deshaies.  Hopefully, that will help our bottom paint last longer.

Install Underwater Lights

My favorite project (and probably David’s least favorite) was our new underwater lights.  This involved very careful measuring, cleaning the bottom paint off, drilling a half-inch hole, applying sealant, and screwing the light in.  David did a great job, we think.  Only time will tell.


 We also had to re-bed our generator exhaust thru-hole, which had been leaking.  David took care of that.

Enclosure Maintenance

Our last personalized package delivery (aka Madeline) included snap and zipper lubricant.  I took my time going around every single snap in our enclosure and lubricating it.  I also lubricated the zippers and stitched up an area where our battens were popping out of the doors.

IMG_1609

Radar Reflector

Our radar reflector broke and fell off while on our way between Tyrell Bay and L’Esterre.  We did an RROB (Radar Reflector Over Board) procedure and picked it up.  David went up the mast while in St George’s to zip tie the reflector down to the stay.

Port Head Hatch

Despite David having re-bed the hatch in the forward guest head, it’s still been leaking.  David attempted to pull the hatch off and re-bed it, but that sucker would NOT come off.  There was lots of sweating and cursing involved.   It was ugly.  In the end, he applied sealant around the edges as a temporary fix to stop the leak.

Fresh Water leak

For a while now we will occasionally hear our freshwater pump run for 2 seconds.  There is a leak somewhere in the system.  David has spent a lot of time trying to track down where the leak is but to no avail.

Cleaning Mascara

This is really really stupid, but the sealant around the four windows on Starry Horizons freeboard leave black streaks running down the fiberglass.  We have been cleaning it off with a soft sponge and dawn, but we got a product called Son of a Gun which will hopefully stop the streaks.

Oil leak

One of our oil change pumps was leaking, so David fixed it!

Clean the bilge

After the saltwater ingress from the generator exhaust thru-hull, there was a ton of salt and grime in our starboard bilge, so I gave it a good cleaning.

Re-splice Continuous Line Furler

The line on our furler was coming a bit undone, so David re-whipped and re-stiched it back together.

Re-setup our Ocens email

The Ocens software and optimizer we use to send and receive emails from our sat phone got changed, so David set up the new email address and tested the optimizer.

Vessel Insurance Coverage

We need to change our insurance to cover the new areas we are sailing to – instead of the Atlantic, we needed insurance to cover the Panama Canal and the Pacific.  Unfortunately, our quote from Pantaneous was 3 times what we have paid the year before.  Jackline (IMIS) quoted us a much better number (still more expensive than the Atlantic though), so we made the switch.

Square Top Rigging

Incidences Sails in La Rochelle installed a rig that pulls the square-top of our mainsail up to the mast.  The line was really getting chafed, so I practiced my eye splice more and replaced the line.  It was tricky…it’s never easy to get a line with two eye splices in it the right length.

Preparing Administratively for Panama and the Galapagos

For both the Panama Canal and the Galapagos, you need to hire an agent to make your visit possible.  We have picked agents for both places and have done a TON of research to determine what we need to do, who we have to see, and where we need to be.  These are two intense areas in terms of regulations and costs.

New Propane Tank

We use our propane tank for cooking in our stove and oven.  There are many places around the world where it is difficult to get propane tanks refilled.  Even in a place like New Zealand and the US, the tanks may not fit regulation requirements and places may not fill them.

Our tanks are composite Viking/Ragasco tanks.  There is a company called Lyte that manufactured composite tanks that underwent a recall.  Since then, even though it was only one brand of composite tanks, some stations (like U-haul) will not refill ANY composite tank.

With two 17 lb tanks, we should be able to go 10 months.  That will allow us to use one up entirely, and then within the next 4-5 months get a refill when it is convenient.

Fun

But don’t worry, we’ve been having (some) fun too.  Don’t get me wrong, the fun to suck ratio is heavily skewed at the moment.  But we did enjoy:

  • shopping for local produce at Grenada Marine
  • Meeting the crew of Jadean, a South African Lagoon
  • Meeting CJ, who dinghied out to us in the bay because he reads our blog!
  • Saying hello to Zero to Cruising!
  • David’s flown his drone at least 10 times here
  • I’ve been practically mesmerized by the nocturnal fish visiting us
  • I had lunch with a fellow WWS (Women Who Sail) member Jan Alexander, who I’ve been chatting online with for a long time
 

Sitting on the back transom, listening to the swell on the beach and watching the fishies!

Posted by Out Chasing Stars on Saturday, February 13, 2016

All Haul Outs

  1. Nanny Cay, BVIs
  2. Grenada Marine
  3. Norsand, Whangarei, New Zealand
  4. The Boat Yard, Vava’u, Tonga
  5. The Boat Works, Coomera, Australia
  6. Phithak Shipyard & Services, Satun, Thailand
  7. G&T Boat Yard, Phuket, Thailand

Watch the Video:  Grenada

Pin it!

16 Comments

  1. Hello. Nice blog. I enjoy reading your blogs. Keep posting. The pictures you have posted are awesome. It seems you have enjoyed a lot. I am planning to have my coming holidays in Grenada with my friends and for this all arrangements are done by a local travel service provider sail-n-dive in Grenada. Hope we will enjoy to the fullest.

  2. I really enjoy the maintenance posts too. I don’t have the sailing knowledge to fully comprehend your “en voyage” notes – but the maintenance part I get!!! It is especially awesome that readers are helping out with suggestions.

  3. Great read, love the maintenance part the most. Would a gasket be an option for that stubborn hatch leak ? Pain to make but may do the trick . Saw the new helia evolution in miami last week it was very nice & thought of you guys . Have you had any problems with the pneumatic arms that hold the 2 forward deck compartment doors up ?

    1. Hi George, thanks for the suggestion. This hatch was among the two that I made my first repair attempts on and I think I was just too stingy with the sealant. I suppose a gasket might work, but I’m not sure the difficulty in having one made would be worth it when doing the job properly should fix the issue. At least that’s what I’m hoping! 🙂

      And so far so good with the pneumatic arms. One has a piece that has started to rust a bit but is holding up okay so far.

      Cheers!

      David

    2. Hi George! I’m not sure if the gasket would be an option. David is going to try to rebed the hatch one more time…

      We have not had any problems with those lifts. One is a watertight locker and the other is not. The not waterproof one does have some rust, but no issues.

  4. Dear Amy and David
    Concerning your leakage in your fresh water system. If there is no leakage to find, it might be a defective or leaking check valve in the pressure pump! Maybe a cleaning will solve your problem.
    Good luck.
    Best regards
    Kjeld

    1. Hi Kjeld,

      Thanks for the suggestion, but I think I finally found the problem! The pressure relief valve for our hot water heater apparently leaks only while the water heater is heating water, which is why it was so hard to find! A new pressure relief valve is on order so hopefully that fixes the problem!

      Cheers,

      David

    2. I actually lied! At the time I was drafting the post David hadn’t figured it out, but before we left he discovered it was the check valve on the water heater!

  5. Hiya, y’all are doing great it sounds like, a full time job taking care of the boat but so satusfying! . Following you all the time. Janet and Jeremy

  6. Sounds like tons of fun. I love hearing about all the maintenance that goes into the boat. It is all just mentally preparing me for the work to come when we are able to purchase ours.

  7. Great to see you both still energized and working to get into the Pacific. Have lot’s of fun.
    Rick and Julie Palm

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.